Genesis 9100 Series for Stand-Alone and Primer for multi layer system.
Genesis 9100 Series can be used as single layer stand-alone coatings, and can also be used as primer in dual and 3-layer system. Genesis 9100 normally applied in the temperature range 230°C to 250°C up to 500 microns as a stand-alone anti corrosion coating, higher thickness can be applied for concrete weight coatings. Genesis 9100 is highly reactive and can be applied at higher rate in 3-layer system. The powder cures with residual heat from the metal and provides optimal adhesion to hot melt adhesives.
It is applied to preheated steel as a dry powder, which melts and cures to a uniform protective coating. Genesis 9100 series have very good adhesion to the metal surface and provide long term mechanical and chemical resistance at various operational temperatures. It has High mechanical impact strength and penetration resistance, very low permeability to water vapors and gases, superior resistance to cathodic disbondment and outstanding dielectric properties. Advanced manufacturing techniques enable Genesis 9100 series to be customized project vise. It can be applied in a wide range of film thicknesses to various diameter line pipes.
Operating Temperature: Genesis 9100 is suitable for operation at continuous temperature up to 100°C in dry conditions and maximum 80°C in wet conditions.
Genesis 9100 series available in following types:
- Genesis 9100FG – Fast Gel Fusion Bonded Epoxy for short diameter External Pipe Coating
- Genesis 9100SG – Standard Gel Fusion Bonded Epoxy for large diameter External Pipe Coating
- Genesis 9100LG – Long Gel Fusion Bonded Epoxy for extra large diameter External Pipe Coatings
For more specifications, please contact with our sales representatives.