Genesis 9600 Internal Coating (IC) FBE Series for pipeline internal coatings
Genesis 9600IC is a thermosetting Fusion Bonded Epoxy Powder designed for lining the internal surface of line pipes, tubes and fittings used for oil, gas, and water transportation. It can also be used without primer on nonproduction tubing such as valves and pumps. When applied over a Phenolic primer, it resist to waste water, corrosive soils, hydrocarbons and sea water. It is based on specially selected Epoxy resins and hardeners formulated in order to meet the specifications related to the internal protection of line pipes. Powder can be applied electrostatically or by air-spray equipments
Genesis 9600IC normally applied on preheated pipe in the temperature range 170°C to 200°C, and then Post Cure 200°C to 232°C for minimum of 30minutes depending upon the wall thickness and diameter of the line pipe.
Operating Temperature: Genesis 9600IC is suitable for operation at continuous temperature up to 100°C.
Genesis 9600IC series available in following types:
- Genesis 9600IC – Standard FBE for internal pipeline coatings with and without Phenolic Primer.
- Genesis 9601IC – Extra flow & chemical resistant internal pipeline coatings
- Genesis 9602IC – High Tg internal pipeline coatings for high service temperature conditions.
For more specifications, please contact with our sales representatives.